COOLANT 50/50

(GREEN AND RED)

HIGH PERFORMANCE
Multiphase protection system that inhibits corrosion and prevents oxidation.
CERTIFIED PRODUCT
Meets international standards ASTM D 33061 for 50% type fluids in MEG
SOAT SYSTEM
It contains Advanced Organic Sales System (SOAT in English) known as selective molecules, also has a wide range of protection and is friendly to the environment.
UNIQUE FORMULA
In addition to offering a multiphase system in the inhibition of corrosion, it prevents oxidation not only on the surfaces in contact with the fluid but also on those surfaces in single contact with steam. It protects the cooling system (hoses, radiator, water pump, external combustion chamber, floating jackets, ducts, among others).
FOR ALL BRANDS
It can be used in light vehicles, heavy transport and industrial machinery of gasoline, diesel or gas. Its formula allows to maintain the automotive cooling system in optimal operating conditions.

PRESENTATION

Drum

208 liters
7.320 fl oz
7.033 US fl oz

Bidón

19 liters
668.707 fl oz
642.466 US fl oz

Gallon

3,785 liters
133.213 fl oz
127.986 US fl oz

Box of 4 Units

3,785 liters (each)
133.213 fl oz
127.986 US fl oz

AWARENESS

In case of contact with skin and/or eyes, rinse thoroughly with clean water.
Notice that if irritation occurs or persists, please consult a doctor.
In case of ingestion, immediately seek a medical assistance.
Keep out of the reach of children!

APPLICABLE:

Cars

HOW DO I USE IT?

  • Turn off the engine and let cool.
  • Drain all the used coolant from the cooling system and fill the radiator tank with the 50/50 Green Coolant up to the level indicated by its manufacturer, start the vehicle for a few minutes and verify the proper functioning of the system, finally place the tank lid and make sure it’s tightly closed.
  • DO NOT DILUTE WITH WATER

SUGGESTIONS OF USE

Choose 50/50 proportion refrigerants that comply with international standards such as the ASTM standard or national standards such as COVENIN, this guarantees that the appropriate concentrations are used because these institutions are responsible for investigating and determining the ideal parameters for the formulas.